Shandong Mengjite International Trading Co., Ltd.
Tel: +86 0536-2332263
Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.
Toe shoe soles generally use a polyurethane injection molding, with acid, water, oil, insulation, abrasion, light and so on. 3 times more wear than ordinary rubber. Softness, light weight, the weight of only 50% -60% of rubber. Different protection toe shoes are also different scope of application, different functions:
01, toe protection toe shoes
Inner Baotou safety performance for the AN1 level, suitable for handling, mining, petroleum, quarrying, metallurgy, ports, machinery, construction, forestry, chemical industry.
02, anti-piercing protection toe shoes
Anti-puncture strength of 1, for mining, fire protection, construction, forestry, cold work, machinery and other industries.
03, electrical insulation protection toe shoes
For electricians, electronic operators, cable installers, substation installation and so on. Matters needing attention: Suitable for working voltage below 1KV working environment, working environment should be able to keep the upper dry. Avoid contact with sharp objects, high temperature and corrosive substances, to help end with corrosion damage.
04, anti-static protection toe shoes
Can eliminate the accumulation of static electricity for flammable workplace, such as gas station operators, liquefied gas filling workers. Note: Do not use insulated shoes; wear anti-static shoes should not wear insulated thick wool stockings or use insulating insoles; anti-static shoes should also be used with anti-static clothing; anti-static shoes generally not more than 200 hours should be carried out Shoes resistance test once, if the resistance is not within the specified range, it can not be used as anti-static shoes.
Choose to protect the toe shoes can follow the following 5 points:
1, in addition to protective footwear should be based on operating conditions, select the appropriate type, but also should fit, make people feel comfortable, it is very important, we must carefully select the appropriate shoe size.
2, protective shoes should be non-slip design, not only to protect the human foot from injury, but also to prevent the operator was caused by slippery accident.
3, a variety of performance protection shoes, to achieve their technical performance protection, such as not to be injured toes, soles are not stabbed, insulated conductive requirements. But protecting toe shoes is not everything.
4, the use of protective shoes to carefully check or test, electrical and acid-base operations, damaged and cracked protective shoes are dangerous.
5, protective shoes should be properly kept after use, after use of rubber shoes with water or disinfectant rinse and dry to extend the service life.