Shandong Mengjite International Trading Co., Ltd.
Tel: +86 0536-2332263
Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.
The protection of toe shoes steel drop head drop-resistance performance may be affected by various factors. According to the principle of protective space in our daily work, it is not only necessary to protect the toe shoe steel head with sufficient strength, but also the sole should be able to immediately form the necessary supporting strength under the ruffles of the toe cap under pressure or impact in order to receive Of the impact can be effectively transferred to the ground, and will not lead to protect the toe soles above the steel head and other parts under stress into the soles.
If the formula protecting the toe shoe soles is relatively stiff, it will be more effective at supporting the toe cap. Another factor to consider is that the design of the shoe soles should be kept in line with the edge of the toe, and the toe of the toe pattern. This is because the spacing between the soles of the soles does not provide good support, so try to avoid overlapping the edges of the steel toe cap and the soles of the soles.
Another may affect the protection of toe shoes steel cap protection of the sole design features is the total thickness of the sole toward the toe direction of the decrease, which increases the toe degrees. On the contrary, this will affect the protective properties of the toe cap, and the toe cap of the forefoot tilts forward when subjected to impact or impact, thereby leaving the forefoot of the toe cap below the trailing edge of the toe cap.
Because most protector toe shoes are designed to conduct impact and pressure through the front shell, its force transfer mechanism does not function effectively if its front shell is depressed below the trailing edge of the toe cap, Shoe Baotou trailing edge will suffer serious deformation.
There is also a sole component of the characteristics can also affect the protection of toe shoes steel head protection, that is cut along the width of the sole, vertical and horizontal section to see the longitudinal section of the upper surface. The material of the upper that is recessed into the sole here increases the gap between the toe of the toe shoe and the toe of the toe so that the amount of deformation of the toe of the shoe will be greater when possible injuries are likely to occur.