Shandong Mengjite International Trading Co., Ltd.
Tel: +86 0536-2332263
Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.
Safety shoes to protect all engaged in heavy industries such as: machinery manufacturing, construction sites, railway construction, coal mining, mold production and other front-line workers in the safety footwear labor protection shoes. Newly bought safety shoes, wear always wear feet, even hundreds of thousands of brand-name safety shoes sometimes so, making the workers wearing a very painful!
According to the requirements of the "Standards for the Provision and Use of Labor Protective Articles for Construction Work," different types of construction workers should be equipped with different safety shoes as follows:
1. Shelf workers, tower crane operators, lifting workers, plastering workers should be equipped with non-slip safety shoes.
2. Maintenance electricians should be equipped with electrically insulated shoes.
3. Welders and gas welders should be equipped with protective toe, piercing safety shoes.
4. Boilers, pressure vessel installers, pipeline installers, bricklayers, masonry workers, steel workers, masonry, construction workers should be equipped with toe shoes to protect, preferably equipped with a protective toe, anti-piercing function and more Functional safety shoes.
5. Painters, waterproof workers should be equipped with anti-static safety shoes.
6. Grinding masonry, concrete workers should be equipped with insulating rubber boots.
Based on many years of production experience, there are several tips to solve the new safety shoes grinding feet, feet here to share everyone. The new safety shoes the most easy to shampoo the two places, one heel, one big toe outside.
1. Use a wet towel to cover the safety shoes at your foot for a few minutes and then hold the dry, soft towel around where you squeezed your foot, knocking it with a hammer, tapping the ground where it is worn, softening the cortex After the formation will not wear a foot.
2. Take a newspaper, squeeze into a ball, dip some water, do not get too wet, but to the whole group are stained with water, and then take a dry newspaper wrapped in wet newspaper, stuffed in the squeeze the site, and then sealed In a plastic bag, overnight, on it.
3. If the labor protection shoes are too small and pinch, wet towel may wish to cover wet, and then shoe wedge large, wear it down on the foot.
4. Before putting on labor protection shoes, first take a piece of soap (usually with a candlelight) in the most contact with the heel of the most thin part of the layer, the shoe will therefore become smooth and no longer wear feet .
5. No matter where your ground to your feet, you place a little bit of wine in the grinding foot place, to ensure that no wear.
6. The newly bought labor protection shoes grinding feet, wear when you can use the hair dryer to heel and presser foot in front of the soft blowing and then wear, the effect is good.
7. Go to the supermarket to buy after the paste, in accordance with the above instructions, posted good on the line. Not only does not wear off my ankle, but also allow labor protection shoes more clothes with the foot, very good.