Shandong Mengjite International Trading Co., Ltd.
Tel: +86 0536-2332263
Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.
Many factories purchase large machinery and equipment for maintenance, and they regularly perform mechanical repairs. There are also some small mechanical parts that will be repaired without affecting their continued use. However, when the machinery is being repaired, safety precautions should be taken. Wear appropriate anti-smashing shoes, proceed from the actual situation to ensure labor safety, reduce the occurrence of safety accidents, and ensure the safety of workers.
Some mechanical objects need to be cleaned with oil or lubricating grease when they are being repaired. This makes it easy for the workers to be contaminated with the oil stains on the uppers of the shoes when they are working, and some workers may slip easily when they are not careful. The oil-impermeability and anti-smashing shoes are anti-grease materials used on soles and uppers, which are not dissolved by oil, have excellent repellent effect on grease, and have anti-slip shoes that are non-slip to grease.
Some mechanical parts and components need to undergo a chemical reaction to detect disinfection equipment. If they are accidentally covered with acid or alkaline liquids when they are not wearing anti-smashing shoes, they will cause foot injuries. The acid-base anti-mite shoes are anti-alcohol shoes with anti-acid-alkali properties, and are used in acid-base, corrosive work environments to protect the feet and prevent acid-base chemicals from harming.
The repair of machinery needs to be carried out on a flat, debris-free site. If there are other debris piled on the ground or sharp metal objects with edges and corners, the sole of the staff may be punctured. The puncture-proof function is to insert steel sheet above the sole to prevent various pointed and hard objects from piercing through the sole of the shoe, thus preventing the foot from being injured.
Due to the serious consequences of mechanical repair injury accidents, such as mechanical injury, puncture, roller compaction, etc., daily work to ensure that mechanical equipment does not cause industrial accidents, not only to repair mechanical equipment work itself to meet safety requirements, but more importantly Operators are required to strictly adhere to safety procedures.
Correctly wear personal protective equipment, wear the appropriate function of the anti-smashing shoes according to their own work needs, such as wearing a puncture-proof and puncture-proof smash-proof shoes during mechanical inspection. When the machinery has a lot of oil, clean the workplace need to wear oil-resistant and anti-smashing shoes. and many more. And the wear must be worn, it should not be worn on the wearer. For example, when the machinery is still in operation during machinery overhaul, it is necessary to wear a cap or safety gloves to prevent unnecessary injuries.