Sitemap | RSS | XML

News

Product

Contact us

Shandong Mengjite International Trading Co., Ltd.

Contacts: Mr.Jing

Tel: +86 0536-2332263

E-mail: export@mengjite.com

Web: www.mengjite.com

Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.

The use of labor protection shoes and the classification of labor gloves

Your current position: Home >> News >> Industry News

The use of labor protection shoes and the classification of labor gloves

Release date:2018-05-12 Author: Click:

Labor protection shoes

The use of labour protective shoes should also be chosen according to the working environment of the operator, and after which kind of shoes are selected. Read the instruction manual before using it. Use it correctly. Besides, what else do you know about the use of labor protective shoes?

1, labor protection shoes should not only choose the right type according to the environment of the operator, but also choose the right shoe number. The distribution of labor protection shoes in a foundry is based on the following conditions: the cast post (including melting, molding), cleaning post, sand core post and boiler operation workers are all anti smashing, anti skid high waist labor protection shoes; maintenance fitter, pipe, riveter, sheet metal work, laboratory test, inspection and so on are all anti smashing, anti skid, and anti oil work. Electric welding shoes; electric welding, electrician, low voltage distribution operation worker, sky car, steam (fork) car worker, etc. all are the protection shoes for preventing the electrical labor protection; the oil depository depository is to prevent the smash and anti static labor protection shoes; the other posts are the ordinary anti smashing, anti skid labor protection shoes.

2, the use of labor protection shoes should be carefully inspected or tested before, if there is no inspection, there will often be security risks. For example, when working in acid or alkaline environment, it is dangerous to have broken or cracked shoes.

3. Keep it well after use. Check and clean it after use and store it in a dry environment. If rubber shoes are used, they should be rinsed and dried with clear water or disinfectant, so that their service life can be prolonged.

4, if the environment of homework is wet and slippery, the shoes must be skid proof. This prevents the operator from slipping to safety. Understanding these common sense of using labor protection shoes can help you to ensure more safety during your homework.

Classification of labor gloves

1, insulated gloves for live work

An insulating glove for electrical insulation on the hand when the operator carries out electrified operations on the electrical equipment (or the corresponding voltage level) of the electrical equipment (or the corresponding voltage level) below the AC voltage of 10 thousand volts or below the voltage level. The product type, size and technical requirements shall comply with the general technical requirements for live insulated gloves. Gloves must have good electrical insulation. It also requires excellent tensile strength and elongation at break, as well as puncture resistance, aging resistance, fire resistance and low temperature resistance.

2, butadiene glove

It is to prevent acid and alkali damage to the protective products of the hand, and its quality should conform to the stipulation of acid proof (alkali) gloves. Gloves are not allowed to have defects such as frost, brittle, sticky and damaged. The gloves do not leak. They must be airtight. Under certain pressure, there is no leakage. The gloves can be classified into rubber gloves, acid and alkali resistant gloves, acid and alkali resistant gloves, plastic acid resistant gloves, plastic impregnated acid resistant gloves and so on. Waterproof gloves and gas gloves can be replaced by acid and alkali resistant gloves.

3, oil resistant gloves

These products are made of NBR, chlorobutadiene, or polyurethane to protect the skin of the hand to avoid various skin diseases, such as acute dermatitis, acne, folliculitis, dry skin, chapped skin, pigmentation, and nail change.

4, welder gloves

Personal protective equipment for the protection of high temperature, molten metal and sparkle when welding. Made of cattle, pig marmoset leather or two layer leather, they are divided into two finger, three finger and five fingers according to finger type. Welder gloves have strict appearance requirements. First grade leather requires uniform thickness, plump, soft and elastic, leather surface is fine, uniform, firm, and uniform in color and no greasy feeling. Two grade: leather body lacks fullness elasticity, leather surface is thick, and the color is slightly shallow.

5, anti vibration gloves

For contact vibration, such as in forestry, mining, construction, traffic and other departments with hand-held vibration tools (such as oil saw, rock drill, etc.) to prevent vibration caused by vibratory occupational disease "white finger disease" personal protective supplies. The structure of the anti vibration gloves is mainly to add some thickness of foam plastics, latex and air interlayer on the palm surface to absorb vibration. The thicker the liner is, the more air it contains, the better the damping effect. But the hands and fingers are too thick to affect the operation.

6. Fire-resistant and flame retardant gloves

The traditional fire-resistant and flame retardant gloves are made of asbestos material. They are divided into two fingers and five fingers. They have large, medium and small specifications. Because asbestos fibers are irritating to human skin, they are rarely used. Nowadays, fire retardant gloves are usually made of flame retardant canvas or other fire-retardant fabrics, which are suitable for smelting furnace or other types of kiln.

7. Antistatic gloves

A fabric consisting of a conductive fiber. The other is a long fiber elastic acrylic knitted glove, then a polyurethane resin attached to the palm part, or a polythene coating on the surface of the fingertip to be attached to the surface of polyamine or gloves. Gloves with conductive fibers quickly dissolve static electricity accumulated on the hands. Gloves with polyurethane or polyethylene coating are mainly not easy to produce dust and static electricity. These products are mainly used for weak current, precision instrument assembly, product inspection, electronics industry, printing, inspection work of various research institutes, etc.

This article URL:http://en.mengjite.com/news/472.html

Related tags:Laborprotectionshoes

Recently browse: