Shandong Mengjite International Trading Co., Ltd.
Tel: +86 0536-2332263
Address: Innovation building, No.2569, Renmin Avenue, Gaomi, Shandong.
The formulation of standards for anti smashing shoes provides technical basis for standardizing and guiding the employing units and practitioners to correctly select and maintain anti smashed shoes. The implementation of standards requires the relevant management departments, employers and practitioners to work together to truly play the guiding role of standards. It is suggested that the employer should formulate the management system for the selection, use and maintenance of the anti smashing shoes according to the standard, strengthen the publicity and training, guarantee the safety cost of the maintenance and maintenance of the shoe, and regularly evaluate, inspect, maintain and replace the anti smashing shoes, in order to reduce the occurrence of foot injury accidents and protect the personnel of the employees. Make positive efforts for safety and health. Anti smashing shoes should be inspected before use and checked regularly, and if they fail to meet the requirements, they should be scrapped. There are two aspects of judging the condition of breaking shoes, namely, appearance defect inspection and protection performance test. Users may refer to the conditions of disqualification stipulated in the product manual, the abandonment requirements prescribed by the employer or 5.4 of the standard. For example, the appearance defects stipulated in standard 5.2, the instructions specified in the instructions of use or other discarded conditions stipulated by the employer; the anti smashing shoes are seriously damaged in the use or storage period, or exceed the effective use period and the storage period; or they shall be discarded by regular inspection or disqualification.
The electrical properties of antistatic shoes (boots), conductive shoes (boots) and electric insulating shoes (boots) are easily affected by the environment, so they should be tested and checked regularly before use. Anti static shoes (boots) and conductive shoes (boots) should be tested once every use of 200H; electrical insulation shoes (boots) should carry out a preventive test of electrical insulation every 6 months. If the test resistance values do not conform to the safety requirements of Table 2, they shall not be continued to use.